V1x32-Edge-10mm-50-177

By |

Specifications

Connector Type Omnetics NPD36 (V32, VC32), Zif Clip (VZ32, VCZ32)
Total Length* 70 mm or 110 mm
Silicon Electrode Thickness 50 µm
Site Material Iridium
Site Target Single Unit or LFP/Stimulation
Support Body Diameter (non-recording area) 400 µm OD

*Total length does not factor in chamber offset from the brain surface. Please consider this measurement when ordering.

Opto-Vector Array Fiber Options:

  • 50 µm dia. core / 62.5 µm dia. cladding / 0.22 NA
  • 50 µm dia. core / 85 µm O.D. / 0.22 NA / Coupling Loss: -3.2 dB per junction (measured with NeuroNexus standard 105 µm patch cable)
  • 105 µm dia. core / 125 µm dia. cladding / 0.22 NA
  • 105 µm dia. core / 125 µm dia. cladding / 0.66 NA

Ordering Information

The Vector Array can be ordered for acute use, optogenetics applications, or chronic use with a chamber-mounted microdrive.

Vector Array™ Alignment Device Used to mount a guidetube and/or protective sleeve onto the Vector Array™
Guidetube Stainless steel, 23 gauge, 35 mm length
OM32-M-F-Jumper_MRI MRI compatible 32-ch Omnetics male-to-female jumper (approx. 2.5″ / 63.5 mm)
OM32/16_x2-Jumper_MRI MRI compatible 32-ch Omnetics male to 2x 16-ch Omnetics female jumper (approx. 2.25″ / 57 mm)
Adpt-OM32-A32 Connects 32-ch Vector Array™ to 32-ch SAMTEC headstage
Adpt-OM32-OM16x2 Connects 32-ch Vector Array™ to two 16-ch Omnetics headstages
Adpt-OM32-Z32 Connects 32-ch Vector Array™ to 32-ch Zif Clip™ headstage
First-time Vector Array purchases come with a free non-functioning mechanical sample.

V1x32-Edge-10mm-60-177

By |

Specifications

Connector Type Omnetics NPD36 (V32, VC32), Zif Clip (VZ32, VCZ32)
Total Length* 70 mm or 110 mm
Silicon Electrode Thickness 50 µm
Site Material Iridium
Site Target Single Unit or LFP/Stimulation
Support Body Diameter (non-recording area) 400 µm OD

*Total length does not factor in chamber offset from the brain surface. Please consider this measurement when ordering.

Opto-Vector Array Fiber Options:

  • 50 µm dia. core / 62.5 µm dia. cladding / 0.22 NA
  • 50 µm dia. core / 85 µm O.D. / 0.22 NA / Coupling Loss: -3.2 dB per junction (measured with NeuroNexus standard 105 µm patch cable)
  • 105 µm dia. core / 125 µm dia. cladding / 0.22 NA
  • 105 µm dia. core / 125 µm dia. cladding / 0.66 NA

Ordering Information

The Vector Array can be ordered for acute use, optogenetics applications, or chronic use with a chamber-mounted microdrive.

Vector Array™ Alignment Device Used to mount a guidetube and/or protective sleeve onto the Vector Array™
Guidetube Stainless steel, 23 gauge, 35 mm length
OM32-M-F-Jumper_MRI MRI compatible 32-ch Omnetics male-to-female jumper (approx. 2.5″ / 63.5 mm)
OM32/16_x2-Jumper_MRI MRI compatible 32-ch Omnetics male to 2x 16-ch Omnetics female jumper (approx. 2.25″ / 57 mm)
Adpt-OM32-A32 Connects 32-ch Vector Array™ to 32-ch SAMTEC headstage
Adpt-OM32-OM16x2 Connects 32-ch Vector Array™ to two 16-ch Omnetics headstages
Adpt-OM32-Z32 Connects 32-ch Vector Array™ to 32-ch Zif Clip™ headstage
First-time Vector Array purchases come with a free non-functioning mechanical sample.

Q1x4-10mm-200-177

By |

The Q1x4-10mm-200-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 10 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-10mm-100-177

By |

The Q1x4-10mm-100-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 10 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-10mm-50-177

By |

The Q1x4-10mm-50-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 10 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-5mm-200-177

By |

The Q1x4-5mm-200-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 5 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-5mm-100-177

By |

The Q1x4-5mm-100-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 5 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-5mm-50-177

By |

The Q1x4-5mm-50-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 5 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-3mm-100-177

By |

The Q1x4-3mm-100-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 3 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.

Q1x4-3mm-50-177

By |

The Q1x4-3mm-50-177 probe is part of our Qtrode line of probes, designed for low channel count experiments or to replace tetrodes and/or wires.

Specifications

Electrode Site Material Iridium (standard)
Electrode Thickness 15 µm or 50 µm
Electrode Length 3 mm
Site Layout Linear
Channel Count 4
Available Packages Acute, Chronic, Flex Cable (microdrive compatible)

Ordering Information

Acute
The Q4 package is designed for easy handling in acute applications.

Chronic
The CQ4 and HQ4 packages are designed for chronic applications. The CQ4 is a miniaturized package for minimal weight and size, while the HQ4 package includes a flex cable to allow for connector standoff from the implant site.

Microdrive Compatibility
The HQ4 is compatible with the dDrive.

Optogenetics
Qtrodes can be configured for both acute (OQ4) and chronic (OCQ4) Optogenetics applications.

Multiple Implant
The Electrode Interface Board (EIB) is part of a miniaturized system that allows multiple probe implants in one animal. The EIB interfaces with the Qtrode Interface Board (QIB) to connect to your recording system.

Headstage Connection
The acute Qtrode package uses edge card technology, while the chronic Qtrode package uses a miniature 5-pin connector. NeuroNexus recommends purchasing an appropriate adaptor with your Qtrode to match your headstage.